diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
index 8f5c0fc..86ee90f 100644
--- a/drivers/spi/designware_spi.c
+++ b/drivers/spi/designware_spi.c
@@ -134,7 +134,7 @@
 	const void *blob = gd->fdt_blob;
 	int node = bus->of_offset;
 
-	plat->regs = (struct dw_spi *)fdtdec_get_addr(blob, node, "reg");
+	plat->regs = (struct dw_spi *)dev_get_addr(bus);
 
 	/* Use 500KHz as a suitable default */
 	plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c
index 418b481..44948c3 100644
--- a/drivers/spi/exynos_spi.c
+++ b/drivers/spi/exynos_spi.c
@@ -255,7 +255,7 @@
 	const void *blob = gd->fdt_blob;
 	int node = bus->of_offset;
 
-	plat->regs = (struct exynos_spi *)fdtdec_get_addr(blob, node, "reg");
+	plat->regs = (struct exynos_spi *)dev_get_addr(bus);
 	plat->periph_id = pinmux_decode_periph_id(blob, node);
 
 	if (plat->periph_id == PERIPH_ID_NONE) {
diff --git a/drivers/spi/fsl_dspi.c b/drivers/spi/fsl_dspi.c
index 3881b2e..887edd8 100644
--- a/drivers/spi/fsl_dspi.c
+++ b/drivers/spi/fsl_dspi.c
@@ -654,7 +654,7 @@
 	plat->num_chipselect =
 		fdtdec_get_int(blob, node, "num-cs", FSL_DSPI_MAX_CHIPSELECT);
 
-	addr = fdtdec_get_addr(blob, node, "reg");
+	addr = dev_get_addr(bus);
 	if (addr == FDT_ADDR_T_NONE) {
 		debug("DSPI: Can't get base address or size\n");
 		return -ENOMEM;
diff --git a/drivers/spi/tegra114_spi.c b/drivers/spi/tegra114_spi.c
index d7eecd5..a965f80 100644
--- a/drivers/spi/tegra114_spi.c
+++ b/drivers/spi/tegra114_spi.c
@@ -118,7 +118,7 @@
 	const void *blob = gd->fdt_blob;
 	int node = bus->of_offset;
 
-	plat->base = fdtdec_get_addr(blob, node, "reg");
+	plat->base = dev_get_addr(bus);
 	plat->periph_id = clock_decode_periph_id(blob, node);
 
 	if (plat->periph_id == PERIPH_ID_NONE) {
diff --git a/drivers/spi/tegra20_sflash.c b/drivers/spi/tegra20_sflash.c
index 82c1b84..afa0848 100644
--- a/drivers/spi/tegra20_sflash.c
+++ b/drivers/spi/tegra20_sflash.c
@@ -90,7 +90,7 @@
 	const void *blob = gd->fdt_blob;
 	int node = bus->of_offset;
 
-	plat->base = fdtdec_get_addr(blob, node, "reg");
+	plat->base = dev_get_addr(bus);
 	plat->periph_id = clock_decode_periph_id(blob, node);
 
 	if (plat->periph_id == PERIPH_ID_NONE) {
diff --git a/drivers/spi/tegra20_slink.c b/drivers/spi/tegra20_slink.c
index f6fb89b..fbb665b 100644
--- a/drivers/spi/tegra20_slink.c
+++ b/drivers/spi/tegra20_slink.c
@@ -106,7 +106,7 @@
 	const void *blob = gd->fdt_blob;
 	int node = bus->of_offset;
 
-	plat->base = fdtdec_get_addr(blob, node, "reg");
+	plat->base = dev_get_addr(bus);
 	plat->periph_id = clock_decode_periph_id(blob, node);
 
 	if (plat->periph_id == PERIPH_ID_NONE) {
diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c
index 7ae1f0e..310fb69 100644
--- a/drivers/spi/zynq_spi.c
+++ b/drivers/spi/zynq_spi.c
@@ -72,7 +72,7 @@
 	const void *blob = gd->fdt_blob;
 	int node = bus->of_offset;
 
-	plat->regs = (struct zynq_spi_regs *)fdtdec_get_addr(blob, node, "reg");
+	plat->regs = (struct zynq_spi_regs *)dev_get_addr(bus);
 
 	/* FIXME: Use 250MHz as a suitable default */
 	plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",